BA8060-B Motor Drive
Metal heat dissipation housing, stable long-time operation.
PWM stepless speed control + multi-protection circuit.
Compact size 96×57.35×21.5mm, easy installation.
Request a Sample
A8060-B Motor Drive High-Performance Brushless Driver
BA8060-B Motor Drive Product Dimensions
Compact aluminum-body package measuring 96 mm (L) × 57.35 mm (W) × 21.5 mm (H), with Ø4.5 mm mounting holes on both flanges for M4 screws. Every dimension below is measured on production units with a digital caliper, so the drawing can be used directly for enclosure layout and bracket design. (Click image to enlarge)
Overall Outline Dimensions
96 mm Overall Length
57.35 mm Body Width
21.5 mm Housing ThicknessBA8060-B Motor Drive Exploded View & Component Breakdown
The BA8060-B Motor Drive is built from a two-piece die-cast aluminum housing, a compact control PCB carrying the MCU, gate driver and electrolytic capacitors, plus a plug-and-play wiring harness, brass standoffs and mounting screws. Service and integration are straightforward: remove two screws, lift the top cover and unplug the connectors — no soldering required. (Click image to enlarge)
Exploded Assembly Overview
Aluminum Housing Die-Cast Front & Back Covers
Control PCB MCU, Driver IC & Capacitors
Accessory Kit Harness, Standoffs & ScrewsBA8060-B Motor Drive Wiring Diagram & Pinout Instructions
The figure below shows the layout of the BA8060-B Motor Drive board. Callouts ①–⑬ mark the signal & power connector, and callouts ⑱⑲⑳ mark the three-phase motor output connector (U/V/W). Click any image to enlarge.
Figure: BA8060-B Motor Drive Board Layout & Connector Callouts
Port Definitions
| Pin | Symbol | Description |
|---|---|---|
| ① | FG | Speed Pulse Output (FGOUT) |
| ② | NC | No Connection |
| ③ | EN | Enable / Start Control |
| ④ | GND | Signal Ground |
| ⑤ | PWM | PWM Speed Control Input |
| ⑥ | 5V | 5V Output |
| ⑦ | VCC | 24V Power Supply Input |
| ⑧ | GND | Power Ground |
| ⑨ | U | Motor Phase U |
| ⑩ | V | Motor Phase V |
| ⑪ | W | Motor Phase W |
1. PWM Speed Control Circuit Section
PWM Speed Control Input Circuit
The external PWMIN signal passes through a 0Ω resistor into an RC filtering network (20kΩ / 100kΩ / 100kΩ with a 1μF capacitor) referenced to the +5V MCU supply. The PWM duty cycle is converted into a smooth DC control voltage (VC) applied to the speed regulation port, ensuring linear and stable motor speed adjustment.
FG or RD Feedback Signal Circuit
The internal FGOUT speed pulse drives an MMBT2222 transistor (100Ω series resistor) as an open-collector output. The host MCU reads the FG line through a 10KΩ (0603) pull-up resistor, allowing real-time RPM measurement and closed-loop speed monitoring of the motor.
In medical devices, industrial ventilation, and precision thermal management systems, a reliable controller for high-speed brushless motors is crucial. The BA8060-B Motor Drive offers an efficient, stable, and highly responsive control solution tailored specifically for BA8060 series micro brushless air blowers and motors. Featuring flexible dual-mode speed regulation via 0–5V analog voltage control and PWM pulse signal control, the BA8060-B Motor Drive delivers smooth commutation, minimal vibration, and maximum operational stability under demanding duty cycles.
Key Application Fields of BA8060-B Motor Drive
Designed for seamless system integration and dependable performance, the BA8060-B Motor Drive is widely used across various specialized industries:
- Medical Respiratory Equipment: Provides precise, low-noise motor drive capabilities for CPAP/VPAP ventilators, air purification devices, and oxygen delivery systems requiring sensitive air pressure adjustments.
- High-Pressure Industrial Blowers: Delivers dynamic torque response and accurate RPM adjustment for industrial sampling pumps, fume extraction fans, and miniature air knives.
- Thermal & Electronics Cooling Systems: Powers high-speed centrifugal fans in high-density server enclosures, laser equipment, and thermal control modules requiring continuous PWM speed control.
- Fuel Cell & Clean Energy Applications: Ensures reliable, continuous air supply loops for small fuel cell stacks and precision environmental conditioning chambers.
- Automated Test Equipment & R&D Labs: Serves as a versatile plug-and-play motor driver for evaluating high-speed BLDC blowers under variable voltages and external load conditions.
Customer Pain Points & How BA8060-B Motor Drive Solves Them
1. Mismatched Drive Algorithms & Instability
Pain Point: Generic motor drivers often lack optimized commutation timing for specialized BLDC blowers, resulting in high heat, stalled rotation, or poor energy efficiency.
Solution: The BA8060-B Motor Drive is tailored with matching commutation parameters, providing smooth, high-efficiency performance for BA8060 motors.
2. Signal Incompatibility (Analog vs. PWM)
Pain Point: System design gets complicated when host controllers use different speed control protocols (0-5V DC vs. digital PWM).
Solution: Equipped with dual-mode signal inputs, the BA8060-B Motor Drive accepts both 0–5V voltage speed regulation and digital PWM speed control out of the box.
3. Acoustic Noise & Motor Vibration
Pain Point: High-rpm BLDC blowers can generate significant electromagnetic whine and resonance if the driver lacks optimized switching.
Solution: Advanced PWM switching algorithms in the BA8060-B Motor Drive significantly reduce current ripple and harmonic vibration for whisper-quiet operation.
4. Driver Overheating & Hardware Failure
Pain Point: Continuous operation under high backpressure causes excessive heat buildup, risking permanent damage to standard driver boards.
Solution: Built with high-grade MOSFETs, optimized copper-clad PCB thermal design, and internal protection circuits, the BA8060-B ensures durable 24/7 reliability.
BA8060-B Motor Drive - Frequently Asked Questions (FAQ)
Find technical details regarding speed regulation, power supply compatibility, wiring setups, and protection features of the BA8060-B Motor Drive.
Q1: Which motor models are compatible with the BA8060-B Motor Drive?
The BA8060-B Motor Drive is specifically engineered for BA8060 series three-phase brushless DC blowers and high-speed motors, matching their phase resistance and inductance characteristics.
Q2: What control signals can I use to adjust the speed on BA8060-B Motor Drive?
It supports two primary speed regulation modes: 0–5V DC analog voltage control (using a potentiometer or DAC) and digital PWM speed control (from a microcontroller or PLC).
Q3: What is the operating voltage range of the BA8060-B Motor Drive?
The driver board supports a wide DC input voltage range, making it fully compatible with both 12V DC and 24V DC power supply configurations depending on your specific motor specifications.
Q4: What is the recommended PWM signal frequency for BA8060-B?
For optimal speed linearity and minimal audible switching noise, a PWM frequency between 10 kHz and 25 kHz is recommended.
Q5: Does the BA8060-B Motor Drive provide real-time speed feedback?
Yes. The BA8060-B includes a dedicated FG (Frequency Generator) pulse output signal, allowing host microcontrollers to calculate and monitor real-time motor RPM.
Q6: What hardware protection features are built into the BA8060-B Motor Drive?
The drive includes integrated over-current protection, locked-rotor protection (automatically cutting output if the motor/impeller jams), thermal protection, and reverse-polarity protection.
Q7: Is the BA8060-B Motor Drive suitable for medical ventilator applications?
Yes. Thanks to its rapid dynamic response, low EMI interference, and stable current control, the BA8060-B Motor Drive is ideal for medical-grade airflow and pressure control devices.
Q8: How do I connect my brushless motor to the BA8060-B Motor Drive?
Connect the motor's three phase wires (U, V, W) to the corresponding output terminals on the drive board. Connect your power supply to VCC and GND, and wire your 0–5V or PWM control line to the speed control signal terminal while sharing a common ground.
Q9: Can the BA8060-B handle high static pressure start-up conditions?
Yes. The drive board features soft-start control logic and dynamic torque regulation to ensure reliable, smooth start-ups even under high static backpressure loads.
Q10: How can I request samples or customized wiring harnesses for BA8060-B Motor Drive?
You can click the "GET A QUOTE" button below or contact our sales team directly to request engineering samples, custom wire harness lengths, connector options, or tailored firmware settings.
GET A QUOTE
× ![Enlarged product image]()
Looking for different sizes or specifications?
Explore our full range of Motor driver, or choose from similar models below.
Motor driver
Need a Custom Modification?
We can customize voltage (5V/12V), wire length, and connectors. Prototypes ready in 48 hours.
Contact Our Engineers
